Applicable model | Software Name (Click to Download Directly) |
PC1600 | SolarPowerMonitor2.2.81: https://sw.mustpower.com/Software/ |
PC1800 | |
PH1000 | |
PH1100 | |
PH5000/PH5900 | |
PH1600 | |
PV1900 | |
EP3000 PLUS/LV2 PV3000 VHM/LVHM |
|
EP3300/PV3300 TLV | |
EP/PV3500 | |
EP/PH/PV1800 | |
EP50 | |
EP50/PV50 | |
EP3000PRO 8-12K/PV3500 PRO 4-12K | |
PV1500 | |
HBP1500 | |
HBP1700 | |
HBP1800 |
1.SolarPowerMonitor.exe: Used in SolarPowerMonitor, software installation.
2.CP210x_VCP_Win7_8.exe: Usb drive,According to the need to install.
3.CH341SER.EXE: Usb drive, According to the need to install.
Where can I download the user manual for Power Monitor 2.2.81?
Download and unzip the package and include it.
Helloo.. i have pv1800-5548 vhm (no Wifi remote monitoring)
how can i use the available usd port or rs485 to get access to my pc? the distance between them is around 20 meters , is there a way to connect them wireless or is it possible to extend the usb cable for the 20meters?? appreciate your help…
20 meters long-distance monitoring can not connect to USB, only RS485 monitoring.
Thank you..
Unfortunately this cable is not available in my country, is there a way to use RS485 port to connect directly to computer?
Obviously RS485 cannot be connected to most computers, you can try to use USB to convert RS485.
No, there exists no manual to the software, only a readme!
What I would like / need is a explanation for engineers of each field.
Also there is many mistakes in the software:
you must disable bluetooth to connect via USB Cable and Power Monitor 2.2.81 displays a very cold temperature far below freezing point. The Grid power is negative and some other problems.
It is also not clear how much % of grid power you save and the user login is admin without passwort, many things you need to know or find out yourself!
I wish I could find a replacement for this poor program Power Monitor 2.2.81!
Click HLEP, and then click instructions. The host computer only has such a simple installation manual. When the host computer is turned on, it cannot be connected to other monitoring software, which will cause interference.
Thank you very much ️for the tips regarding bluetooth. After disabling bluetooth, the software worked perfectly.
Good morning,
I recently installed a PH 1800 inverter and need your help with the software, SolarPowerMonitor2.2.81.
I have installed it on my computer but the software gives me an error message, saying that it failed to connect to the UPS.
What should I do to connect it to the inverter?
Best,
Peter.
Hello! You also need to install the two drivers in the compressed package.
CH341SER.EXE
CP210x_VCP_Win7_8.exe
Hello, I have a PV-1800 pvm…I have downloaded the Power Monitor 2.2.81 but it does not find my invertor…simply sys “searching”…I am using Windows 10 Pro…What do I need to do?
Hello! You also need to install the two drivers in the compressed package.
CH341SER.EXE
CP210x_VCP_Win7_8.exe
so, win10 may not be compatible…
where i can find user’s manual for solarpowermonitor2.2.81 ?
Click HLEP, and then click instructions. The host computer only has such a simple installation manual. When the host computer is turned on, it cannot be connected to other monitoring software, which will cause interference.
this how install the app
i ask about app info
what “inverter search mode”
how i know the battery is full?
https://images2.imgbox.com/f4/e3/3k0b8IgJ_o.png
The function of this software is relatively simple, the data display is intuitive, you can refer to this document, I hope it is helpful to you.
PowerMonitor (PH1800) User Manual
————————————-
Ps:PowerMonitor is an inverter/charger monitoring software which can monitor multiple type devices.The major functions of PowerMonitor software include data log for devices, fault messages, and parameter setting for devices.
Parameter “inverter search mode” saves battery power in case of no or very low load connected to the inverter.
You can read about “search mode” for Victron inverters – there is plenty information about this feature in their documentation. Here in Must inverter it means the same though less flexible (only on or off without additional parameters).
preciso do software do pv 1800 modelo pv18-3024 VHM
SolarPowerMonitor2.2.81
Hello, Do you have a Linux Version?
no
WHY NOT??
Hello,
Which RS485 converter should work with PC1800 Inverter to connect to SolarPowerMonitor via WiFi/ETH?
I’m considered Eflin EE11A or HF2211 is it good or something else?
Solar Power Monitor is debugged through RS485 cable
Hi,
I have PH-18-5248 PRO previous generation of inverter (not the latest),
Im using USB com to connect inverter to solar power monitor 2.2.81 with Windows 8 (64bit version) OS.
The inverter connects to software and im able to monitor and tweak settings.
However the issue is that the COM connection keeps on dropping every 30 seconds and resume scan.
In my control panel device list i can observe USB serial CH-340 installed properly and status indicates ‘the device is working properly’ I have also tries all my USB ports in PC and all gives the same result as well.
Please advice what is causing this connection drop and forcing to rescan, is there any setting to be fine tuned from USB serial CH-340 com hardware properties (port settings) from PC side such as bits, data bits, parity, stop bits, flow control ?
Really appreciate if anyone can advice on how to fix this issue.
Please can you let me know if the SolarPowerMonitor2.2.81 software is available for Apple Mac. The Windows version will not work on my laptop?
Does anybody knows what parameter “Inverter Max discharging current” means?
Tested it in SBU mode. If grid exists – it uses battery power not more than Pmax = 230V AC * this parameter setting. More load adds Grid using in the mix with battery.
It’s cool but unfortunately it also limits battery charging. Inspite of 30A max utility current set for battery it charges battery with the same Pmax only.
Does anybody know how to charge battery with full power while limiting discharge only?
What is the password..?
what is the password for SolarPowerMonitor2.2.81????
The “administrator” or “123456678” – not working
Is admin
try admin
Hello, Do you have a Linux Version?
Good day. I have a pv1800 inverter. Do you have a android app for Samsung that i can use? Or is the software onlt pc based??
Its not working for me its keep searching and searching iam using win 11 connect it through printer cable from usb in the inverter to usb in the pc
Its not working for me its keep searching and searching iam using win 11 connect it through printer cable from usb in the inverter to usb in the pc
Try disable bluetooth in you computer, I had the same issue and it worked for me after doing that.
I have 2 Must PV1800 PRO model inverters. I cannot connect to both inverters with the SOLARPOWERMONITOR 2.2.81 program. PV1800 does not appear in the program interface.
CH341 and other driver installed.
The same issue for me, I Have the PV1800 PRO inverter and it keeps searching
Do you have software for IOS (Apple iPhone)?
Hi
Can I construction a connection between the 1800pv vm 3kw inverter and a lithium battery via a BMS cable?
Please what is the largest size USB cable I can use? I tried with 10 meters and it doesn’t work, it keeps searching and can’t find the Inverter. However, I tested it with what comes with the device (1.5 meters) and it worked normally. Thanks