SolarPowerMonitor2.2.81

By | January 22, 2024
Applicable model Software Name (Click to Download Directly)
PC1600 SolarPowerMonitor2.2.81:
https://sw.mustpower.com/Software/
PC1800
PH1000
PH1100
PH5000/PH5900
PH1600
PV1900
EP3000 PLUS/LV2
PV3000 VHM/LVHM
EP3300/PV3300 TLV
EP/PV3500
EP/PH/PV1800
EP50
EP50/PV50
EP3000PRO 8-12K/PV3500 PRO 4-12K
PV1500
HBP1500
HBP1700
HBP1800

1.SolarPowerMonitor.exe: Used in SolarPowerMonitor, software installation.
2.CP210x_VCP_Win7_8.exe: Usb drive,According to the need to install.
3.CH341SER.EXE: Usb drive, According to the need to install.

42 thoughts on “SolarPowerMonitor2.2.81

  1. Fred

    Where can I download the user manual for Power Monitor 2.2.81?

    Reply
  2. Elie Khoury

    Helloo.. i have pv1800-5548 vhm (no Wifi remote monitoring)
    how can i use the available usd port or rs485 to get access to my pc? the distance between them is around 20 meters , is there a way to connect them wireless or is it possible to extend the usb cable for the 20meters?? appreciate your help…

    Reply
      1. Elie khoury

        Thank you..
        Unfortunately this cable is not available in my country, is there a way to use RS485 port to connect directly to computer?

        Reply
  3. fran

    No, there exists no manual to the software, only a readme!
    What I would like / need is a explanation for engineers of each field.
    Also there is many mistakes in the software:
    you must disable bluetooth to connect via USB Cable and Power Monitor 2.2.81 displays a very cold temperature far below freezing point. The Grid power is negative and some other problems.
    It is also not clear how much % of grid power you save and the user login is admin without passwort, many things you need to know or find out yourself!
    I wish I could find a replacement for this poor program Power Monitor 2.2.81!

    Reply
    1. enmustee Post author

      null
      Click HLEP, and then click instructions. The host computer only has such a simple installation manual. When the host computer is turned on, it cannot be connected to other monitoring software, which will cause interference.

      Reply
    2. Luan Carvalho

      Thank you very much ️for the tips regarding bluetooth. After disabling bluetooth, the software worked perfectly.

      Reply
  4. Peter

    Good morning,

    I recently installed a PH 1800 inverter and need your help with the software, SolarPowerMonitor2.2.81.

    I have installed it on my computer but the software gives me an error message, saying that it failed to connect to the UPS.

    What should I do to connect it to the inverter?

    Best,

    Peter.

    Reply
    1. enmustee Post author

      Hello! You also need to install the two drivers in the compressed package.
      CH341SER.EXE
      CP210x_VCP_Win7_8.exe

      Reply
      1. Jack

        Hello, I have a PV-1800 pvm…I have downloaded the Power Monitor 2.2.81 but it does not find my invertor…simply sys “searching”…I am using Windows 10 Pro…What do I need to do?

        Reply
        1. enmustee Post author

          Hello! You also need to install the two drivers in the compressed package.
          CH341SER.EXE
          CP210x_VCP_Win7_8.exe

          so, win10 may not be compatible…

          Reply
    1. enmustee Post author

      null
      Click HLEP, and then click instructions. The host computer only has such a simple installation manual. When the host computer is turned on, it cannot be connected to other monitoring software, which will cause interference.

      Reply
        1. enmustee Post author

          The function of this software is relatively simple, the data display is intuitive, you can refer to this document, I hope it is helpful to you.
          PowerMonitor (PH1800) User Manual
          ————————————-
          Ps:PowerMonitor is an inverter/charger monitoring software which can monitor multiple type devices.The major functions of PowerMonitor software include data log for devices, fault messages, and parameter setting for devices.

          Reply
        2. Oleksandr

          Parameter “inverter search mode” saves battery power in case of no or very low load connected to the inverter.
          You can read about “search mode” for Victron inverters – there is plenty information about this feature in their documentation. Here in Must inverter it means the same though less flexible (only on or off without additional parameters).

          Reply
  5. Luke

    Hello,
    Which RS485 converter should work with PC1800 Inverter to connect to SolarPowerMonitor via WiFi/ETH?
    I’m considered Eflin EE11A or HF2211 is it good or something else?

    Reply
  6. Mevan

    Hi,
    I have PH-18-5248 PRO previous generation of inverter (not the latest),
    Im using USB com to connect inverter to solar power monitor 2.2.81 with Windows 8 (64bit version) OS.

    The inverter connects to software and im able to monitor and tweak settings.
    However the issue is that the COM connection keeps on dropping every 30 seconds and resume scan.

    In my control panel device list i can observe USB serial CH-340 installed properly and status indicates ‘the device is working properly’ I have also tries all my USB ports in PC and all gives the same result as well.

    Please advice what is causing this connection drop and forcing to rescan, is there any setting to be fine tuned from USB serial CH-340 com hardware properties (port settings) from PC side such as bits, data bits, parity, stop bits, flow control ?

    Really appreciate if anyone can advice on how to fix this issue.

    Reply
  7. Barry

    Please can you let me know if the SolarPowerMonitor2.2.81 software is available for Apple Mac. The Windows version will not work on my laptop?

    Reply
  8. Oleksandr

    Does anybody knows what parameter “Inverter Max discharging current” means?
    Tested it in SBU mode. If grid exists – it uses battery power not more than Pmax = 230V AC * this parameter setting. More load adds Grid using in the mix with battery.
    It’s cool but unfortunately it also limits battery charging. Inspite of 30A max utility current set for battery it charges battery with the same Pmax only.
    Does anybody know how to charge battery with full power while limiting discharge only?

    Reply
  9. 100matolog

    what is the password for SolarPowerMonitor2.2.81????
    The “administrator” or “123456678” – not working

    Reply
  10. Eugene

    Good day. I have a pv1800 inverter. Do you have a android app for Samsung that i can use? Or is the software onlt pc based??

    Reply
  11. ahmed saad

    Its not working for me its keep searching and searching iam using win 11 connect it through printer cable from usb in the inverter to usb in the pc

    Reply
  12. ahmed saad

    Its not working for me its keep searching and searching iam using win 11 connect it through printer cable from usb in the inverter to usb in the pc

    Reply
    1. Fer

      Try disable bluetooth in you computer, I had the same issue and it worked for me after doing that.

      Reply
  13. İrfan ŞENSOY

    I have 2 Must PV1800 PRO model inverters. I cannot connect to both inverters with the SOLARPOWERMONITOR 2.2.81 program. PV1800 does not appear in the program interface.
    CH341 and other driver installed.

    Reply
    1. Asmae

      The same issue for me, I Have the PV1800 PRO inverter and it keeps searching

      Reply
  14. emad

    Hi
    Can I construction a connection between the 1800pv vm 3kw inverter and a lithium battery via a BMS cable?

    Reply
  15. Erasmo

    Please what is the largest size USB cable I can use? I tried with 10 meters and it doesn’t work, it keeps searching and can’t find the Inverter. However, I tested it with what comes with the device (1.5 meters) and it worked normally. Thanks

    Reply

Leave a Reply to Youssef Cancel reply

Your email address will not be published. Required fields are marked *